|
Model
|
LR-ZB100C3P
|
|
Type
|
Distance setting M8 connector 3-pin
|
|
Shape
|
Rectangular
|
|
Detectable distance
|
35 to 100 mm 1.38" to 3.94" (650 to 0)*1
|
|
Standard detectable deviation
|
35 to 50 mm 1.38" to 1.97" ： 1.5 mm 0.06", 50 to 100 mm 1.97" to 3.94" ： 3 mm 0.12"
|
|
Display resolution
|
2 (0.2 mm 0.008")
|
|
Spot diameter
|
2 × 1 mm 0.08" × 0.04", at 100 mm 3.94"
|
|
Response time
|
1.5 ms / 10 ms / 50 ms selectable
|
|
Light source
|
Type
|
Red laser (660 nm)
|
|
Laser class
|
Class 1 laser product (IEC60825-1, FDA (CDRH) Part1040.10*2)
|
|
Function
|
Indicator
|
3-digit 7-segment display (red),output indicator (yellow),DATUM indicator (orange), 1 spot indicator (green)
|
|
Timer
|
OFF/ON delay/OFF delay/One-shot
|
|
Specifications
|
Control output
|
PNP Open collectorApplied voltage 30 VDC or less,Control current 100 mA or less,Residual voltage 1.2 V or less at 10 mA or less,2 V or less at 10 to 100 mA
|
|
Protection circuit
|
Protection against reverse power connection, output overcurrent,output surge, reverse output connection
|
|
Output operation
|
Light-ON / Dark-ON selectable
|
|
External input
|
Input time calibration： 35 ms or more ON, 35 ms or more OFFLaser emission stop： 2 ms or more ON, 20 ms or more OFFShort-circuit current： 2 mA or less*3
|
|
Rating
|
Power voltage
|
10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS
|
|
Power consumption
|
450 mW or less (18 mA or less at 24 V, 34 mA or less at 12V)
|
|
Environmental resistance
|
Enclosure rating
|
IP68 (IEC60529)/IP69K (DIN40050-9)/4X, 6P, 13 (NEMA250)
|
|
Operating ambientluminance
|
Incandescent lamp：4000 lx or lessSunlight： 8000 lx or less*4
|
|
Operating temperature range
|
-10 to +50°C
|
|
Ambient temperature for storage
|
-25 to +75°C
|
|
Operating ambient humidity
|
35 to 85%RH
|
|
Shock resistance
|
1000 m/s2 in X, Y, Z axis directions respectively 6 times
|
|
Vibration
|
10 to 55 Hz Double amplitude 1.5 mm in the X, Y, Zaxis directions respectively, 2 hours
|
|
Insulation resistance
|
20 MΩ or more (500 VDC)
|
|
Withstand voltage
|
1000 VAC 50/60 Hz 1 min
|
|
Material
|
Case： SUS316L, Display： PES,Lens cover： PMMA with scratch-resistant coating,Packing/Connector ring： FKM
|
|
Accessories
|
Instruction Manual, Certification/Identification label (FDA)
|
|
Weight
|
Approx 55 g
|
|
*1 Display reading used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds “-99”, “-FF” is displayed.
*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.
*3 M8 connector (3-pin) type does not include the external input function.
*4 When the response time is 10 ms
|